SFP+ Transceiver 10GBase-ZR 10Gb/s CWDM, 80KM

Product Description
F-tone Networks's series optical transceiver is designed for fiber communications application up to 10G, which fully compliant with the specification of SFP+ MSA SFF-8431.This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are eight center wavelengths available from 1470nm to 1610nm, with each step 20nm. A guaranteed optical link budget of 23 dB is offered.The module is with the SFP+ connector to allow hot plug capability. Only single 3.3V power supply is needed. The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal of receiver.This module provides digital diagnostic functions via a 2-wire serial interface as defined by the SFF-8472 specification.

Features:
● Operating data rate up to 10.3Gbps
● 1550nm cooled EML Transmitter
● High sensitivity APD Receiver
● Distance up to 80km over SMF
● Single 3. 3V Power supply and TTL Logic Interface
● Duplex LC Connector Interface,Hot Pluggable
● Compliant with SFP+ MSA Specification SFF-8431
● Compliant with SFF-8472
● Operating Case Temperature Standard:0oC~+70oC

Applications:
● 10GBASE-ZR at 10.31Gbps
● 10GBASE-ZW at 9.95Gbps
● 1000 Base-LX Ethernet
● 8x FC at 8.5Gbps
● 4x FC at 4.25Gpbs
● 2x FC at 2.125Gpbs
● 1x FC at 1.0625Gbps
● Other optical links

Order Information:

Important Notice

Performance figures,data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.