Supports 9.95Gbps to 10.5Gbps bit rates
     Maximum link length of 300m (50um,MMF,2000MHz.Km)
     850nm VCSEL laser and PIN receiver
     Low power consumption <1.5W
     +3.3V +1.8Vpower supply
     XFP MSA package with duplex LC connector
     XFI electrical interface
     No reference clock required
     Compatible with RoHS
     Excelllent EMI performance
     Built-in digital diagnostic functions
     Temperature range: 0℃ to +70℃
     High reliability

     Supports 9.95Gb/s to 11.1Gb/s bit rates
     Hot-pluggable XFP footprint
     Maximum link length of 10km with SMF
     1310nm Uncooled DFB laser
     XFP MSA package with duplex LC connector
     No reference clock required
     Compatible with RoHS
     +3.3V +1.8V power supply
     Power dissipation <2.5W
     Built-in digital diagnostic functions
     Operating temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)

• Hot-pluggable SFP+ footprint
• Supports rate selectable 1.25 Gb/sOr 9.95 to 10.3 Gb/s bit rates
• Power dissipation < 1W
• RoHS-6 compliant ( lead-free )
• Single 3.3V power supply
• Maximum link length of 300m on2000 MHZ-km MMF
• Uncooled 850nm VCSEL laser
• Receiver limiting electrical interface
• Duplex LC Connector
• Built-in digital diagnostic functions
• Commercial temperature range： 0°C to 70°C(Standard), -40°C to 85°C (Industrial)

1. Optical interface compliant to IEEE 802.3ae 10GBASE-LR
2. Electrical interface compliant to SFF-8431
3. Hot Pluggable
4. 1310nm DFB transmitter, PIN photo-detector
5. Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
   
6. Low power consumption
7. Applicable for 10km SMF connection
8. All-metal housing for superior EMI performance
9. Advanced firmware allow customer system encryption information to be stored in transceiver
10. Cost effective SFP+ solution, enables higher port densities and greater bandwidth

1. Compliant with SFF-8431 and IEE802.3ae
2. Data rate selectable ≤4.25Gbps or 9.95Gbps to 10.3Gbps bit rates
3. Cooled EML transmitter and PIN receiver
4. link length up to 40km
5. Low Power Dissipation 1.5W Maximum
6. Operating Case Temperature：0°C to 70°C(Standard), -40°C to 85°C (Industrial)
7. Single 3.3V power supply
8. Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
9. RoHS compliant and lead free

1. Compliant with SFF-8431 and IEE802.3ae
2. Data rate selectable ≤4.25Gbps or 9.95Gbps to 11.3Gbps bit rates
3. Cooled EML transmitter and APD receiver
4. link length up to 80km
5. Low Power Dissipation 1.4W Typical (Maximum:2W)
6. Operating Case Temperature:0°C to 70°C(Standard), -40°C to 85°C (Industrial)
7. Single 3.3V power supply
8. Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
9. RoHS compliant and lead free